柜体外壳由一整块钢板经10次折叠构成，结构坚固，承载负荷大
1 The power distribution Cabinet is made of a single piece of steel plate folded by 10 times, the solidstructure can carry a large load, the Es and PS Series can coordinate with eachother in size , the general purpose components and accessories can be quickly installed, and the front door can be both single and double opened, which should be above the ground by 25mm, and the concealed hinges are easy to be installedand replaced. The Front door can be opened by 130 degrees , the door is equipped with a rectangular frame whose holes are drilled by every 25mm, it can not only strengthen the door , but also make it convenient for the installation of the post placed wall bard for the wiring harness and electrical components

2 Easy installation with screw fasteners , rear door panels can also be replaced by themounting plate , and the depth can be adjusted by the unit of every 25mm.

3 All of the door, cabinet , after the wall panels have a safe and reliable groundingconnection. There are three parts at the bottom of the movable sealing plate into the line, the hole can also be removed, which makes it easy to enter into the line more flexibly.The base is the same as that of the PS series (optional) International quality cabinets

4 cabinetsof international quality whose components can be replaced.Size can be customized according to customer requirements about specifications and thechange of hole opening.

Surface
finish: degreasing, pickling, phosphatic, electrostatic spraying

Body
color: RAL7032 / RAL7035

Mounting
plate color: RAL1003 hot dip galvanized

Base
color: RAL7022 / RAL9011